Using Paper From A User Defined Series - Oki LP-2060-MF User Manual

Using Paper from a User Defined Series

Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
80 80
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
The Printer supports the following user defined series rolls.
Standard-size printing cannot be performed with user defined series. All printing is
actual length printing.
279.4 mm (11 inches)to
914.4 mm (36 inches)
This section describes the procedure for operating with a user defined series.
(1) Set the available size standards
Available Size Standards ( & page
In
Note
When this setting is changed, the Printer restarts.
‹
(2) Set the user defined size
In the user defined series, four paper widths from user defined 1 to 4 are available.
In User Defined Size, set the width for each
Note
When this setting is changed, the Printer restarts.
‹
(3) Set the paper size standards
Set the roll you intend to use to On in
are recommended to set all unrequired rolls to Off.
Note
It is not possible to set all the user defined series rolls to Off.
‹
When this setting is changed, the Printer restarts.
‹
Default values:
User Defined 0 = 914 mm (35.98 inches)
User Defined 1 = 620 mm (24.41 inches)
User Defined 2 = 450 mm (17.72 inches)
User Defined 3 = 310 mm (12.20 inches)
104), set User Defined to On.
( & page
Paper Size Standards ( & page
106).
105). You