i
13.1 Logging on devices
1.
If the display is off, turn it on by pressing any button.
2.
>
M
3.
OK
4.
5.
5.1
6.
OK
or
30
/
M
Switch the desired DuoFern device to
log-on mode.
Start the log-on process on the DuoFern Sun/
Wind Sensor.
The log-on process remains active for a
maximum of 2 minutes.
the log-on process is terminated after success-
fully logging on or by pressing the button.
Continue, see next page.
Select menu 9.
Open menu 9.
The number of logged-on
DuoFern devices is dis-
played.
After successfully logging
on, the number of logged-
on DuoFern devices is
updated on the display.
EN