12.3 Menu 8.2 - Rotation direction test / change of
i
rotation direction
1.
If the display is off, turn it on by pressing any button.
2.
>
M
3.
>
OK
4.
OK
5.
/
6.
/
Changing the rotation direction as required
7.
8.
Point 1 to 6
9.
OK
or
26
/
/
>
OK
M
Select the tubular motor/actuator to be tested
and confirm with OK.
Test the rotation direction.
Extend the awning/close the shutter
Retract the awning/open the shutter
Stop command
Press both buttons simultaneously. Note the
feedback or confirm the tubular motor or
actuator.
Repeat the rotation direction test.
return to menu 8 "Service functions".
Open menu 8 and select
menu 8.2.
Open menu 8.2.
The number of the select-
ed tubular motor or actuator
flashes on the display. The
number corresponds to the
log-on sequence.
EN