RADEMACHER 9499 Instruction Manual page 31

i
13.1 Logging on devices
i
The motor will therefore move several times during the log-on
process.
Behaviour in the event of a failed log-on
Error causes:
After successfully logging on, the DuoFern Sun/Wind
Sensor configures the following settings on the newly
logged-on device, see next page:
◆ Automatic wind function is activated
◆ Wind movement direction UP/Retract
◆ Automatic sun function is activated
◆ Sunshine position set to 100 %
In the event of an error, the message "Err"
appears and the log-on process is
terminated.
The maximum number of logged-on DuoFern
devices has been reached or an attempt has
been made to log on an unsuitable device.
EN
31