RADEMACHER 9499 Instruction Manual page 36

i
14. Reset (factory settings)
This function can be used to completely reset the DuoFern Sun/Wind
Sensor to the factory settings.
All previous settings and logged-on DuoFern devices are deleted.
1.
M
OK
2.
M M M
OK OK OK
2.1
3.
Release the four buttons again.
36
4 sec. Press and hold all 4 buttons simultaneously.
Then all data is reset to the factory settings:
Set limits:
- Sun
- Wind
Logged-on
DuoFern devices: none
To confirm this, all symbols and segments are
shown on the display.
The software version is then briefly displayed.
The standard display then appears again, see
point 1 above.
Press any button to turn
on the display.
60 klux
18 km/h
EN