Table of Contents
Advertisement
TX Settings Menu
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TIME OUT
* New Zealand: 1 to 5.
14-10
Summary of Settings
Description
Enable/disable Error Correction Mode (ECM) during
transmission.
Select the length of the pause entered between numbers
with the R (Redial)/Pause button.
Select whether the MultiPASS C70 redials if the other
party's line is busy on the first attempt.
Select the number of redial attempts.
Select the period of time between redial attempts.
Enable/disable the TIME OUT feature.
ON: Scanning starts 10 seconds after the last number is
entered when sending to multiple destinations (five seconds
if only sending to one destination).
OFF: After entering the last number, press the Start/Scan
button, or else the MultiPASS C70 will return to standby
mode after 60 seconds.
Settings
ON/OFF
2 SEC
(1 to 15)
ON/OFF
2 TIMES
(1 to 2)*
2 MIN.
(1 to 99)
ON/OFF
(Default settings are shown in bold type.)
Chapter 14
Advertisement
Table of Contents
