Using The Multipass C70 With The Multipass Desktop Manager For Windows; Hardware And Software Requirements - Canon MultiPASS C70 User Manual

Using the MultiPASS C70 With the
MultiPASS Desktop Manager for Windows
Canon's MultiPASS Desktop Manager for Windows
the MultiPASS C70's faxing, telephone, printing, and scanning functions
directly from your PC.
For more details on using your MultiPASS C70 with the MultiPASS
Desktop Manager, refer to the MultiPASS Suite Software User's Guide.
n
The MultiPASS Desktop Manager is designed to operate with
Windows

Hardware and Software Requirements

Before you start, make sure you have the following PC setup. These are
the minimum requirements.
IBM
An Intel Pentium processor is recommended.
Microsoft Windows
For Microsoft Windows
32 megabytes (MB) of RAM. 64 MB of RAM is recommended.
60 megabytes (MB) of available hard disk space. 150 MB of available
hard disk space is recommended.
CD-ROM drive, or access to one over a network connection
256-colour SVGA monitor or greater
Bi-directional shielded IEEE 1284-compatible parallel cable 2 metres
in length or shorter. For assistance on purchasing the correct cable,
contact your local authorised Canon dealer.
1-10
Introducing the MultiPASS C70
® 95, 98, and NT 4.0.
® or compatible computer with a Pentium 90 processor or higher.
95, 98, or NT 4.0
®
® NT 4.0, Service Pack 3 or later
®
allows you to use
®
Chapter 1