Table of Contents
Advertisement
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 22 sec.)
RECEIVE (factory default setting) and DISCONNECT.
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the MultiPASS C70
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 55 seconds.
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when FAX/TEL AUTO SW is selected. See the
following page for details on changing the settings:
n
You can also set these options from the MultiPASS Desktop Manager.
(1 MultiPASS Suite Software User's Guide)
* Australia only: After answering, the MultiPASS C70 plays "You are
connected. Please hold."
Chapter 8
Telephone
Sending document
The MultiPASS C70 answers without ringing.*
The MultiPASS C70 listens for the fax tone.
(For 8 sec.)
The fax tone is not detected.
The MultiPASS C70 starts ringing.
If you don't pick up the handset
(within 22 sec.).
DEFAULT ACTION
Choose between:
RECEIVE
(Factory default setting)
Fax
Sending document
manually
automatically
The fax tone
The document is
is detected.
received automatically .
(The fax tone is
detected and the
MultiPASS C70
switches to receive
mode.)
Pick up the
handset to talk.
DISCONNECT
The MultiPASS C70
disconnects the call.
Receiving Faxes
Fax
8-11
Advertisement
Table of Contents
