Table of Contents
Advertisement
3. While holding the operation panel, remove the document.
n
If the paper does not pull out easily, do not force it. Contact your local
authorised Canon dealer or the Canon help line.
4. When you are finished, close the operation panel by pressing it
down from the centre.
n
Be sure to close the operation panel until it locks into place. Otherwise
the unit will not function properly.
5. Press Resume to clear the error message, then start the operation
Resume
again. Be sure to fan and stack your document before reinserting
the stack in the Automatic Document Feeder (ADF).
Chapter 13
Pull it in either direction, but do not force it.
If a multipage document is loaded, remove the entire document
from the Automatic Document Feeder (ADF).
13-5
Troubleshooting
Advertisement
Table of Contents
