fantastic furniture Ashford Bedside 2 Drawer Manual page 9

Step 9
You will need:
1 x Cam
Nut
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Back Suport Rail(P4) to Left Side(P2), insert Cam Nut (H2) into Rail (P4), rotate
the Cam Nuts so the arrow point towards the incoming cam bolt, turn clockwise to lock.
Step 10
You will need:
2 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Right Side(P3) to Back Suport Rail(P4) and Front Suport Rail(P5). insert Cam
Nut (H2) into Rail (P5, P4), rotate the Cam Nuts so the arrow point towards the
incoming cam bolt, turn clockwise to lock.
www.fantasticfurniture.com.au
PAGE 9