Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Amirah Dresser
Summary of Contents for fantastic furniture Amirah Dresser
- Page 1 Version 1.2 Amirah Dresser fantasticfurniture.com.au...
- Page 2 We're thrilled you've chosen Fantastic Furniture to help create a home you'll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly. -
Page 4: What You Need
What you need to assemble the product Top Panel (P1) Shelf Panel (P5) Back Right Panel Other tools you need Panel (P3) Phillips head screwdriver, soft headed Back (P15) Panel mallet. Door (P16) Parts list (P6) Center Panel Top Panel (P1); (P4) Left Panel (P2);... - Page 5 Step 1 You will need 10 x Cam Nuts 12 x Wood Dowels (H2) (H3) 14 x Cam Bolts Phillips Head (H1) Screwdriver Soft Headed Mallet Prepare the frame: Insert 10 x cam nuts (H2) into panels (P2), (P3), (P4) & (P7). Rotate the cam nuts so the arrows point towards the incoming bolt.
- Page 6 Step 2 You will need 12 x Wood Dowels 12 x Cam Nuts (H3) (H2) 8 x Cam Bolts Phillips Head (H1) Screwdriver Soft Headed Mallet Insert 12 x cam nuts (H2) into panels (P8), (P9), (P11) & (P12). Rotate the cam nuts so the arrows point towards the incoming bolt.
- Page 7 Step 4 You will need 24 x 12mm 4 x Drawer Runners L Screws (H5) (H15) 4 x Drawer Phillips Head Runners R Screwdriver (H16) Repeat x 4 Attach the drawer runner L (H15) and the drawer runner R (H16) to the underside of the drawer with 6 x 12mm screws (H5) using a phillips head screwdriver.
- Page 8 This is how a cam nut works..Step 6 The head of the cam bolt goes into the open mouth of the cam nut. You will need You then turn the cam nut so it tightens over the bolt. Phillips Head Screwdriver Attach panels (P7), (P8) to panel (P2) by aligning the dowels &...
- Page 9 Step 8 This is how a cam nut works..The head of the cam You will need bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Phillips Head Screwdriver Attach panel (P3) to panels (P7), (P8) &...
- Page 10 Step 10 Warning Label at the back Laminated Side and top of unit Front Slide panels (P15) & (P16) into the grooves in panels (P2), (P3) & (P4) with the laminated side facing the front for panel (P15). Step 11 You will need Phillips Head Screwdriver...
- Page 11 Step 12 You will need 4 x 16mm Screws 2 x Hinges (H10) (H13) Phillips Head Screwdriver Attach 2 x hinges (H13) to door panel (P6) with 4 x 16mm screws (H10) using a phillips head screwdriver. Step 13 You will need Phillips Head 4 x 16mm Screws Screwdriver...
- Page 12 Step 14 You will need 1 x 22mm Screw 1 x Rhinestone (H6) Handle (H7) 4 x Metal Shelf Phillips Head Support (H12) Screwdriver Attach the handle (H7) to panel (P6) with 1 x 22mm screw (H6) using a phillips head screwdriver .
- Page 13 Step 16 TO ADJUST THE DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL). Step 16a Step 16b Step 16c Move Door In Move Door Out Adjust the door move in or out a little. panel panel Top panel Door : The door should Door : The door should Door move in a little.
-
Page 14: Job Complete
Step 17 You will need 2 x Wall 2 x 16mm Straps (H14) Screws (H10) 2 x Washers Phillips Head Pre-Drilled (H9) Screwdriver Hole We strongly advise that you use the wall safety strap provided to prevent the unit toppling over. Attach wall fixing strap to panel (P1) with 2 x 16mm screws (H10) and 2 x washers (H9) using a phillips head screwdriver.