Advertisement
Step 11
Slip Back Panel(P12) into the grooves on the side panels.
Step 12
You will need:
6 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Top Panel(P1) to the unit as show on picture.
insert Cam Nut (H2) into Side Panels (P2, P3), rotate the
Cam Nuts so the arrow point towards the incoming cam
bolt, turn clockwise to lock.
www.fantasticfurniture.com.au
informative label
nearby top
x 6
PAGE 10
Advertisement
