Advertisement
Step 12
You will need:
6 x Cam Bolts
(H3)
Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown.
Step 13
You will need:
6 x Dowels
(H1)
6 x Cam Nuts
(H4)
Turn carcase onto feet.
Insert 6 x Dowels (H1) into the holes of Side Panels (P2,P3) and Divider (P7).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2,P3) and Divider (P7).
Rotate the cam nuts so the arrows point towardsthe incoming cam bolts.
Attach Top panel (P1) and tighten the cam nuts.
Step 14
You will need:
14 x Small
Screws
(H5)
Turn carcase onto front.
Put Back Panel (P10) into the groove
on the back of the carcase, colour faces inside.
Attach with 14 x Small Screws (H5).
H3
H3
H3
(P1)
H4
H1
H1
(P7)
H4
H4
(P2)
H3
H3
H3
(P1)
H1
H1
H4
H4
H4
(P10)
(P3)
H5
H5
Page 8
Advertisement
