Advertisement
Step 7
You will need:
1 x Cam Nut
(H4)
2 x Long
Screws
(H12)
Insert 1 x Cam Nut (H4) into the hole of Divider (P8).
Rotate the cam nuts so the arrows point towards the incoming cam bolt.
Push Divider (P8) onto Rail (P5) place and tighten the cam nuts.
Attach Rail (P9) to Divider (P8) with 2 x Long Screws (H12).
Step 8
You will need:
Dowels
2 x
(H1)
2 x Cam Nuts
(H4)
Insert 2 x Dowels (H1) into the holes of Divider (P8).
Insert 2 x Cam Nuts (H4) into the holes of Divider (P8).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Shelf Panel (P6) into place and tighten the cam nuts.
Step 9
You will need:
4 x Cam Nuts
(H4)
Insert 4 x Cam Nuts (H4) into the holes of Shelf Panel (P6) and Rails (P5,P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
H4
H4
H4
(P3)
H4
H12 H12
(P8)
(P5)
H4
(P6)
H1
H4
(P8)
H4
(P6)
(P4)
(P9)
(P9)
(P5)
(P9)
(P5)
H4
Page 6
Advertisement
