Advertisement
Step 15
You will need:
5 x Small Cam
Bolts
(H10)
Dowel
1 x
(H1)
Insert 1 x Dowel (H1) into the hole of Drawer Front (P11).
Attach 5 x Small Cam Bolts (H10) as shown.
Step 16
You will need:
5 x Small Cam
Nuts
(H11)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 5 x Small Cam Nuts (H11) into the holes of Drawer Sides (P13,P14) and Support Rail (P17).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P13,P14) and Support Rail (P17) into place and tighten the cam nuts.
Step 17
Slide Drawer Base (P15) into the groove
in Drawer Sides (P13) and (P14) .
H10
(P11)
(P13)
H11
H11
(P11)
(P13)
(P11)
H10
H10
H1
H10
(P17)
H11
(P15)
(P14)
H10
(P14)
H11
H11
Page 9
Advertisement
