Step 4
You will need:
2 x Cam Nuts
(H4)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Shelf Panel (P6) onto Rail (P4) and tighten the cam nuts.
Step 5
You will need:
2 x Dowels
(H1)
2 x Long Screws
(H12)
Insert 2 x Dowels (H1) into the holes of Divider (P7).
Attach Divider (P7) to Shelf Panel (P6) with 2 x Long Screws (H12).
Step 6
You will need:
1 x CL Runner
Track
(H6)
1 x CR Runner
Track
(H7)
6 x Small
Screws
(H5)
Attach 1 x CL Runner Track (H6) to Divider (P8) with 3 x Small Screws (H5)
as shown, and then turn over to the other side.
Attach 1 x CR Runner Track (H7) with 3 x Small Screws (H5).
H1
(P7)
H1
VENEERED
H5
CL
H6
H5
H5
H5
H6
(P8)
(P6)
H4
(P4)
H4
(P6)
H12
H12
(P4)
H5
CR
H7
H5
FLIP
H5
H5
H7
(P8)
Page 5