Install The Belt Lock (Ksfb4Lock) (Option) - DITEC KS200HD Installation Manual

4 Mechanical installation
4.3.14

Install the belt lock (KSFB4LOCK) (option)

a Fix the belt lock (21) to the extension beam (6) with square nuts (4) and screws (43). Then
tighten the screws (43) with a torque of 10 Nm.
Note! * Cut the extension beam to smaller pieces.
Bi-parting
2/3 of the extension beam for backbone assembly.
1/6 of the extension beam for tension wheel.
1/6 of the extension beam for belt lock.
Left opening
2/3 of the extension beam for backbone assembly.
1/3 of the extension beam for tension wheel and belt lock.
Right opening
2/3 of the extension beam for backbone assembly and belt lock.
1/3 of the extension beam for tension wheel.
M6 (2x)
4
120
6
21
DIN 6921 (M6SF)
43
M6x10 (2x)
Issue 2020-09-28
4 Square nut
6 Extension beam
21 Belt lock
43 Screw
1019202-DIen-3.0