Quick Start Manual
10
2.2 Channel Screen
2.2 Channel Screen
The settings can be copied
from another channel.
❖
See Section 5.1.
❖
See Section 5.2.
Shows the setting channel.
Set the input type.
❖
See Section 5.1.
❖
See Section 5.2.
Set the range.
The settings depend on
the type of input.
❖
See Section 5.1.
❖
See Section 5.2.
Shows the waveform
display range.
Set the scaling.
❖
See Section 5.4.
Enter an input channel
comment.
❖
See Section 5.1.
Set the waveform dis-
play area (range.)
❖
See Section 5.1.5.
Set the waveform screen
color.
❖
See Section 5.1.6.
Set the waveform magnifi-
cation factor.
❖
See Section 5.1.7.
Set the waveform display
position.
❖
See Section 5.1.8.
Set the waveform sheet.
It is possible to divide into
wave sheets S1 to S4, for
display and recording.
❖
See Section 5.1.9.
Set the display layout.
This can be set when
there are Dual or Quad
waveform display
screens.
❖
See Section 5.1.10.