Display Screen and Setting
Items
This chapter describes the major screens of the Memory HiLogger
and parameters to be set on each screen.
2.1 Status Screen
Set the recording interval.
❖
See Section 4.2.
Set the recording period.
The recording period is
restricted, depending on
the measurement chan-
nel settings.
❖
See Section 4.4.
Set the measurement
channels on or off (input
settings). Only those
channels enabled here
can be set in the chan-
nel screen.
❖
See Section 4.5.
Make the digital filter
setting.
❖
See Section 4.7.
The reference pages referred to above are those in the instruc-
tion manual.
2.1 Status Screen
2
Enter the title comment.
❖
See Section 4.1.
Set the time axis (time
per division.)
❖
See Section 4.3.
Set auto saving.
Data can be saved to a
PC card in real time.
❖
See Section 4.6.
Switch to the corre-
sponding application
setting screen.
9
1
2
3
4
5
5
6
7
8
9
10