Changing The Code - Kaba SIMPLEX LD470 Installation Instructions Manual

G. CHANGING THE CODE
G-1 Remove the lock from the door.
G-2 Remove the 4 retaining (red) screws from
the back of the outside unit assembly. Take
extra care to keep the outside unit assembly on a flat surface when you
are removing the cover plate because there are many small components
inside.
G-3 You will now see that there are 5 red color coded tumblers and 8 blue col-
ored un-coded tumblers, plus 1 clear tumbler ('C' button).
G-4 To change your code, hold the outside unit assembly with the push-buttons
facing down. Press the "C" button and
hold it.
If the "C" is not held in while changing
the code, the lock can be damaged.
G-5 Using the tweezers supplied (or small
needle nose pliers), you can easily
remove one or more of the coded and
un-coded tumblers.
Note: The red tumblers represent coded
digits and the blue tumblers
represent non-coded digits.
Note: NEVER remove the 'C' tumbler.
G-6 Please note the different shapes of the
tumblers before reinserting them into
the lock body. There is a difference in
shape between the coded and un-coded
tumblers as illustrated. When refitting
the tumblers into the lock body, they must be fitted facing the correct way
as show in the illustration.
Note: All square cutouts must face outwards. The bump on the tumbler
(either color) must fall into the machined slot.
G-7 After you have refitted the tumblers and made a note of the new code,
replace the metal cover plate with the 4 screws.
Note: With the spare tumblers provided, you can either increase the num-
ber of digits in your code to 6-7, or reduce to 3-4.
8
"deadlatch"
Square
cut out
Square
cut out
Square
cut out
push button
"latchbolt"
RED CODED
TUMBLER
BLUE
UNCODED
TUMBLER
Square
cut out