Table of Contents
Advertisement
Handsfree Answerback
Handsfree Answerback allows you to answer a voice call without lifting the handset. Handsfree
Answerback is always turned off for a T7100 telephone.
You can turn Handsfree Answerback on or off for a telephone programmed to use Handsfree. You
need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
Hearing aid compatibility
The handsets on all system telephones are compatible with hearing aids as defined in the FCC
rules, Part 68, section 68.316. Not all hearing aids are optimized for use with a telephone.
Call Duration Timer
Press ≤‡‡ to see how long you were on your last call, or how long you have been on your
current call.
221 02:47
Line061 01:45
Accidental disconnect
If you accidentally drop the handset back into the telephone cradle while answering a call, you can
retrieve the call.
Pick up the handset again or press the handsfree button within one second to reconnect to your call.
Disconnect supervision
When disconnect supervision is assigned to a line, the system detects when an external caller
hangs up and releases the line for other uses. The installer assigns disconnect supervision.
Time
Press ≤°‚‹ to display the current date and time while you are on a call.
The display shows the last call you made, or the current call, and
the total elapsed time in minutes and seconds.
You parked your last call. You cannot see the length of time a
call was parked.
Chapter 11 Telephone features
Telephone Features Programming Guide
99
Advertisement
Table of Contents
