Table of Contents
Advertisement
NOTE:
1.
According to the requirements of the site, both DC and AC power supply are provided to support
different requirements of installation site. If DC power is selected, the power cable connects to the
DC power supply directly. If AC power is selected, the power cable must connect to the AC power
supply through a DC-AC adaptor.
2.
The antenna ports and CAL/GPS port must have waterproof protection.
2.8
Power On
Power on the eNB, and wait a few minutes while the eNB boots up. Per the previous
figures, check that the LED indicators are lighting as expected.
12
Advertisement
Table of Contents
