Table of Contents
Advertisement
Item
Power consumption
Power
Weight
Basic report function
Cooling Method
Noise Figure
MTBF
MTTR
NOTE: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Global Part Numbers
Model No.
sBS71010
1.4.3 Software Specification
Item
LTE Standard
Peak Rate
User Capacity
QoS Control
Modulation
≤ 300W
+40.5V to 57 V DC, Nominal +54VDC
11.0kgs
RSSI , VSWR, TSSI(transmission signal strength),
temperature, etc.
Natural convection cooling @ vertical installation
Room temperature: <2.5
All temperature: <3.5
≥ 150000 hours
≤ 1 hour
Band48, 10MHz, 20MHz per carrier, DL 4 x 4 or 2 x 2 on
each carrier, 2 carriers
3GPP Release 15
2x20 MHz:
SA1: DL 320Mbps, UL 28 (56)Mbps
CA
SA2: DL 440Mbps, UL 14 (28)Mbps
mode
2x10MHz:
SA1: DL 160Mbps, UL 14 (28)Mbps
SA2: DL 220Mbps, UL 7 (14)Mbps
20 MHz:
SA1: DL 160Mbps, UL 28Mbps
Single
SA2: DL 220Mbps, UL 14Mbps
carrier
10MHz:
SA1: DL 80Mbps, UL 14Mbps
SA2: DL 110Mbps, UL 7Mbps
128+128 concurrent users
256+256 RRC users
3GPP standard Quality of Service Class Identifier (QCI)
UL: QPSK, 16QAM, 64QAM
5
Description
Description
.
Description
Advertisement
Table of Contents
