Trane MCC Series Owner's Manual page 21

Installation of Batteries
1. Slide the back cover of the remote control down to
take it off.
2. Insert two dry AAA batteries into the slot. Be sure that
the + and - directions are correct.
3. Fix the back cover to the remote control as before.
Operation Mode
1. FAN MODE
Press POWER button to turn unit on.
Press MODE button to select operation mode
until indicator shows at "FAN" position on LCD
display.
Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
A
Auto –> Low –> Medium –> High
MCC-SVU01A
MCC-SVU01A_En.indd 7 MCC-SVU01A_En.indd 7
Control Operation
Note
- In FAN MODE, the LCD display will not show
setting temperature and cannot adjust setting
temperature, SLEEP.
2. COOL MODE
Press POWER button to turn unit on.
Press MODE button to select operation mode
until
display.
Press
temperature between 16 – 32 °C.
Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
A
3. DRY MODE
Press POWER button to turn unit on.
Press MODE button to select operation mode
until
display.
Press
temperature between 16 – 32 °C.
FAN SPEED will be automatically set at Low and
cannot be changed.
Swing Mode
Swing mode help distribute better airfl ow
throughout the room.
Press SWING button to activate swing motor, the
supply air grill will automatically swing to distribute
airfl ow throughout the room.
Press SWING button again to stop the supply air
grill at any specifi c direction.
indicator shows at "COOL" position on LCD
or TEMP button to set the desired
Auto –> Low –> Medium –> High
indicator shows at "DRY" position on LCD
or TEMP button to set the desired
7
4/18/13 5:31:29 PM 4/18/13 5:31:29 PM