Advantech EPC-P30X6 Series User Manual page 11

Safety Precaution - Electricity/ 安全措施 - 静电防护 /
安全措施 - 靜電防護
Follow these simple precautions to protect yourself from harm and the products from
damage.
1. To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it.
2. For the sake of the equipment, disconnect power before making any configura-
tion changes. The sudden rush of power as you connect a jumper or install a
card may damage sensitive electronic components.
3. Electronic components are also vulnerable to damage by electrostatic dis-
charge. An electrostatic charge can build up on the human body, especially
where the air is dry. At minimum, dissipate potential body charge before han-
dling any electronic board by touching a conductive surface on the chassis.
Only then remove circuit boards from their antistatic bags. Handle boards by the
edges or mounting brackets only; do not touch components or connecting pins.
为了保护您和您的设备免受伤害或损坏，请遵照以下安全措施：
 操作设备之前，请务必断开机箱电源，以防触电。不可在电源接通时接触 CPU 卡
或其他卡上的任何元件。
 在更改任何配置之前请断开电源，以免在您连接跳线或安装卡时，瞬间电涌损坏
敏感电子元件。
為了保護您和您的設備免受傷害或損壞，請遵照以下安全措施：
 操作設備之前，請務必斷開機箱電源，以防觸電。不可在電源接通時接觸 CPU 卡
或其他卡上的任何元件。
 在更改任何配置之前請關閉電源，以免在您連接跳線或安裝卡時，瞬間電湧損壞
敏感電子元件。
EPC-P30X6 User Manual/ 用户手册
xi