About This Machine - Riso ComColor GD9630 Quick Manual

Preparation

About This Machine

Main Unit and Optional Scanner
This section describes the main parts of the machine.
Scanner
1
Use the scanner to copy or scan documents that
are read from the platen glass or the ADF
(automatic document feeder).
Face down tray
2
Printouts are output face down.
Standard tray
3
Load special paper (thick paper, envelopes, etc.)
here. You can also load plain paper.
4
1
2
3
Copying p.10

Scanning p.14

When Paper Runs Out p.24

Feed trays
4
Load the paper to be used for printing here.
Special paper such as thick paper cannot be
loaded.
When Paper Runs Out
Front cover
5
Open when paper is jammed or when replacing an
ink cartridge.
When Ink Runs Out
Operation panel
6
Use to perform operations or configure settings.
The viewing angle can be adjusted for improved
visibility.
The USB port is located on the left side.
Using a USB Flash Drive
ComColor GD Series Quick Guide
6
5
4
p.24

p.26

Operation Panel p.5

p.22
