Exchange Procedure To Wheel Adaptor 32 Deg And Large Diameter Wheel; Exchange Procedure To Wheel Tension Spring (Spring Is Optional) - FUTABA T10PX Short Manual

Exchange procedure to wheel adaptor 32 deg and large diameter wheel

- Obtain hex wrench./ Remove the battery.
1
Hold the wheel and remove the screw.
(Using a hex wrench.)
2
Pull off the wheel and wheel adapter.
3
Install the standard or large diameter
steering wheel and the 32 degree wheel
adapter using the screw.
(Using a hex wrench.)
- Adjust the scale of the steering channel
accordingly by using the "Calibration
Function (System menu)".

Exchange procedure to wheel tension spring (spring is optional)

- Obtain hex wrench / phillips screwdriver / tweezers / Remove the battery.
1
Hold the wheel and remove the screw.
(Using a hex wrench.)
2
Pull off the wheel and wheel adapter.
3
Remove the wheel spring cover mount-
ing screw.
(Using a screwdriver.)
4
Replace the wheel springs with twee-
zers.
(Using a tweezers.)
Cover
Screw
22
Steering wheel
mounting screw
Wheel adapter
Wheel
With Wheel adapter
Wheel
Wheel Spring