Method; When Charging For The Optional Lipo; Battery - FUTABA T10PX Short Manual

Lipo Battery LT2F2000B Replacement Method
Battery charging port
LED
Store the battery wiring in
this groove.
Connect to the connector
on this side.
When Charging For The Optional LiPo Battery
To charge the battery, connect a type C USB cable to the Futaba optional USB AC adapter or a commercially
available USB AC adapter (USB-A type 5 V-2 A) from the Lipo dedicated charging port.
LiPo Battery charging port
Warning
Do not charge the Lipo battery with LBC-34/38D P or ICS LF-01.
There is a risk of explosion or fire, which is very dangerous.
Do not charge the Lipo battery from the charging port on the top back of
the transmitter
There is a risk of explosion or fire, which is very dangerous.
Attention to the direction!
Battery charging port, LED
on this side.
● LiPo battery installation
Install the Lipo spacer on the transmitter
and then the Lipo battery.
Be sure to do it when using LiPo.
● Battery type change
7.26
Be sure to change to LiPo battery type
in System Menu → Battery
Charging LED
Red: Charging
Green: Full
● Charging LED
Lights red while charging. When charging
is complete, it lights up in green.
20
Lipo spacer
Use a commercially
available USB charger
AC adapter
USB Cable
USB-A type 5 V-2 A
Do not charge the Lipo
battery from here ！