Advertisement
Step 7
You will need
12 x Shelf Supports
24 x Washers (H4)
& Screws (H7)
2 x Magnetic
Door Catches (H10)
Note: the door can be fitted to
open from the left or right side
of the cabinet. These instructions
show how to assemble the door to open from the
left side. If you prefer the door to open from the right side, place the Magnetic Door Catches
on the opposite side of the Top & Bottom Panels.
Insert 2 x Magnetic Door Catches (H10) into the Top and Bottom Panels (P5&P1). Attach 12 x
Shelf Supports & Screws (H7) to Side Panels (P4x2) with 24 x Washers (H4) as shown.
Step 8
You will need
2x Door hinges/hinge
plates (H8)
Peel the backing o 2x Hinge Plates (H8) to expose the adhesive side and place at adjacent
ends of the Door Panel (P6) as shown. Slide 2 x Door Hinges (H8) over the top of the Hinge
Plates (H8), ensuring the hinge nodule is positioned in the corners of the Door Panel (P6),
then secure with the Hinge Bolts by tightening with a Phillips Head Screwdriver.
Do not overtighten.
fantasticfurniture.com.au
Phillips head
Screwdriver
(H8)
(H10)
(P4)
(H10)
(H8)
(H8)
(P5)
(H4)
(H7)
(P4)
(P1)
(P6)
(H7)
(H4)
Page 9
Advertisement
