Advertisement
Step 1
You will need
4 x Feet Screws
(H6)
Phillips head
Screwdriver
Attach 4 x Feet (H5) to the underside of the Base (P1) with 4 x Feet Screws (H6) by
tightening with the Phillips Head Screwdriver.
Step 2
Turn Base (P1) over to rest on Feet (H5). Insert Back Panel (P5) into the groove of
the Base (P1) as shown.
fantasticfurniture.com.au
THIS PRODUCT MUST BE ASSEMBLED ON A SOFT
SURFACE SUCH AS CARPET OR A RUG TO PREVENT
ACCIDENTAL SHATTERING DURING ASSEMBLY. IF YOU
DO NOT HAVE A SOFT SURFACE. LAY THE CARDBOARD
PACKAGING FLAT AND USE AS A BASE FOR ASSEMBLY.
(H6)
4 x Feet
(H5)
(H5)
(H6)
(H5)
(H6)
Base
(P1)
(H5)
Back
(P2)
Base
(P1)
(H6)
(H5)
Page 6
Advertisement
