ESAB CIGWELD EasyWeld 130 Operating Manual page 58

EasyWeld / HandyWeld 130
PROBLEM
10 Gas flow continues after
the MIG Gun trigger switch
has been released (MIG
Gas Solid mode).
Error Code
1 E05 A MIG Gun Trigger held
depressed whilst turning
Power Source ON.
B MIG Gun Trigger Lead
Shorted.
SERVICE
CAUSE
Gas valve has jammed open
due to impurities in the gas or
the gas line.
Table 6-1
CAUSE
A
B
Table 6-2
Have an accredited CIGWELD
service provider repair or
replace gas valve.
REMEDY
Ensure that the MIG Gun Trigger is NOT held
depressed whilst turning Power Source ON.
Inspect MIG Gun Trigger and MIG Gun lead for any
possible damage and repair or replace as necessary.
6-4
REMEDY
0-5618