ESAB CIGWELD EasyWeld 130 Operating Manual page 5

AS/NZS 3820:2020, Essential Safety Requirements for Electrical Equipment
Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2017
Type of equipment
Arc welding power source
Type designation
EasyWeld 130
EasyWeld 160
HandyWeld 130
HandyWeld 160
Brand name or trademark
CIGWELD
Manufacturer or his authorized representative established within the EEA
Name, address, and telephone No:
Cigweld Pty Ltd
71 Gower Street
Preston, Victoria, Australia, 3072
Phone: +61 3 9474 7400; www.cigweld.com.au
The following has been used in the design:
AS 1674.2:2007
AS 60974.1:2020
AS/NZS 3760-2010
EN IEC 60974-1: 2018/A1:2019
EN 60974-10:2014/A1:2015
Additional information:
Restrictive use, Class A equipment, intended for use in location other than residential.
This equipment is also in compliance with the essential requirements of EU Directives 2014/30/EU and
2014/35/EU.
By signing this document, the undersigned declares as manufacturer, or the manufacturer's
authorized representative, that the equipment in question complies with the safety requirements
stated above.
Place/Date
Preston
2021-06-10
DECLARATION OF CONFORMITY
According to
with serial number from: GC131-xxxx-xxxx
with serial number from: GC132-xxxx-xxxx
with serial number from: GC133-xxxx-xxxx
with serial number from: GC134-xxxx-xxxx
Safety in welding and allied processes, Part 2: Electrical
Arc Welding Equipment, Part 1: Welding Power Sources
In-service Safety Inspection and Testing of Electrical Equipment
Arc Welding Equipment, Part 1: Welding Power Sources
Arc Welding Equipment, Part 10: EMC requirements
Signature
Jarrod Brennan
General Manager