ESAB CIGWELD EasyWeld 130 Operating Manual page 3

WARNING
! !
Read and understand this entire Manual and your employer's safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
CIGWELD EasyWeld / HandyWeld 130 Welding Inverters
Instruction Manual Number 0-5618 for:
Part Numbers W1201130 and W1200130
Published by:
CIGWELD Pty Ltd
CIGWELD An ESAB Brand
71 Gower Street,
Preston, Victoria, Australia, 3072
+61 3 9474 7400
www.cigweld.com.au
Copyright 2021
CIGWELD Pty Ltd
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1915.
Publication Date: 01-10-2021
Revision Date:
Record the following information for Warranty purposes:
Where Purchased:
Purchase Date:
Equipment Serial #:
The Serial Number is located on the bottom of the machine in the Data Label.
+61 3 9474 7391
____________________________________
____________________________________
____________________________________
i
EasyWeld / HandyWeld 130