Eco:drive; Eco:drive Display; Recording And Transferring Trip Data - Fiat 500 Hybrid 2020 Owner's Handbook Manual

Connected services that can be
accessed on the car
The Uconnect™ LIVE services
available in the radio menu can vary
according to the market.
The eco:Drive™ and my:Car
applications were developed to
improve the customer's driving
experience, therefore they are available
in all markets where the Uconnect™
LIVE services can be accessed.
For further information visit the
www.driveuconnect.eu website. If the
navigation system is installed in the
radio, accessing the Uconnect™ LIVE
services enables use of the TomTom
LIVE services. Further information
about the LIVE functions is available in
the dedicated chapter.

eco:Drive™

The eco:Drive™ application allows
you to display your driving behaviour in
real time, in order to help you reach
a more efficient driving style as far
as consumption and emissions are
concerned.
In addition, the data can be saved
on a USB flash drive, and the data
analysis can be made on your personal
computer thanks to the eco:Drive™
desktop application, available on
www.fiat.it or www.driveuconnect.eu.
Driving style is evaluated by means of
four indices which monitor the following
parameters:
Acceleration
Deceleration
Shifting
Speed
eco:Drive™ display
Press the eco:Drive™ button to
interact with the function. A screen will
be displayed on the radio, showing the
4 indices described above. These
indices are grey until the system
has enough data to evaluate the
driving style. Once sufficient data are
available, the indices will have 5 colours
depending on the evaluation: dark
green (very good), light green, yellow,
orange and red (very bad).
"Current trip index" refers to the entire
value calculated in real time based on
the average of the described indices.
It represents eco-friendliness of the
driving style: from 0 (low) to 100 (high).
In the event of extended inactivity the
display will show the average of the
indices up to that moment ("Average
index") then the indices will be coloured
again in real time as soon as the car is
restarted.
To check the data average for the
previous trip (the "trip" starts when
the ignition key is turned to the MAR
position and stops when it is turned
to STOP), select the "Previous Route"
button.
The details of the previous trip can also
be displayed by pressing the "Details"
button to show trip duration (time and
mileage) and average speed.
Recording and transferring trip
data
The trip data can be stored in the
system memory and transferred using
a suitably configured USB memory
stick or by Uconnect™ LIVE app. This
allows you to display the history of the
collected data, showing the complete
analysis of the trip data and of your
driving style.
Further information is available at
www.driveuconnect.eu.
WARNING Do not remove the
USB memory stick nor unpair the
smartphone and the Uconnect™
LIVE App before the system has
downloaded the data, since these
could be lost.
During the transfer of data to the
devices, messages may appear on
the radio display to guide the user
correctly through the operation; follow
these instructions. These messages
are only displayed with the ignition
key at STOP and when a delay in the
177