Updating The Map; Preparing A Usb Device; Downloading A Map; Tomtom Home Installation - Fiat 500 Hybrid 2020 Owner's Handbook Manual

NOTE: The navigation system volume
can only be adjusted during navigation
when the system provides voice
indications.

Updating the map

Two modes for downloading a map
update are available:
Most recent maps guarantee: if a
new map is available for your system
within 90 days of initial use, you can
download it once free of charge.
Map update: you can purchase
a new version of the map installed
on the system. To check availability
or purchase a map, make sure that
you have prepared a USB device and
installed TomTom HOME on your
computer.

Preparing a USB device

To update the map, use a USB device
that meets the following requirements.
The USB device should preferably be
empty.
The USB device must have at least
8 GB of free memory.
The USB device must have a FAT-32
file system.
The USB device must not be blocked
and must allow files to be saved.
NOTE: the use of a memory stick
is recommended, while the use of
mass storage devices, such as mobile
phones or multimedia players, is not
recommended.
To prepare a USB device, proceed as
follows:
Select "Navigation updates" in
the "Settings" menu. You are asked
whether you wish to prepare a USB
device for downloading updates.
Select Yes.
Insert the USB device.
NOTE If the system continues to ask
you to insert the USB device, check
that the device meets the requirements
indicated previously, then retry. The
system starts to prepare the USB
device.
When the USB device is ready, the
following message is displayed.
Remove the USB device and connect
it to the computer. The new map
can now be downloaded to the USB
device.

TomTom HOME installation

To install TomTom HOME and create
a MyTomTom account, proceed as
follows:
Download and install the
TomTom HOME application on the
computer. On the computer, access
tomtom.com/getstarted. Select
"Download TomTom HOME", then
follow the instructions provided.
Connect the USB device prepared
with the computer. TomTom HOME is
started automatically.
Select "Log in" in the top right corner
of TomTom HOME.
Select "Create account" and enter
the required details to create a
MyTomTom account. A MyTomTom
account is required to receive map
updates. After creating the account,
you will be asked if you want to
connect the Uconnect™ system to
your account.
The prepared USB device represents
your Uconnect™ system.
Select "Connect device" and then
select "Close".
A map can now be downloaded to the
USB device.

Downloading a map

Connect the USB device to the
computer.
If a map update is available for the
system, this update is included in the
list of updates available.
NOTE If the most recent map is already
installed on the system, the update is
not proposed. Select the map that you
wish to download, then select "Update
and install".
The map is downloaded and copied to
your USB device.
179