Voice Commands; Troubleshooting; Installing The Map; Global - Fiat 500 Hybrid 2020 Owner's Handbook Manual

Select "Done" when the process is
complete.
NOTE Don't disconnect the USB
device from the computer while
map downloading and copying is in
progress.
The map can now be installed on the
system.

Installing the map

After downloading a map to your USB
device, it can be installed on your
system.
WARNING The map update MUST be
made with the vehicle engine running
and may require more than 30 minutes.
WARNING Do not disconnect the
USB device during the map installation
process, otherwise installation will be
interrupted.
Insert the USB device containing the
new map in the Uconnect™ system.
The system detects a new map on the
USB device.
Select "Start".
Keep the device inserted. Before
updating the map, the system indicates
that this process may take several
minutes. Select "OK".
NOTE Do not remove the USB device
and do not disconnect the system's
180
power supply before the update is
complete. The system cannot be used
until the update is completed correctly.
If the update is interrupted, the system
update is started again.
Once the map has been updated, the
following message is displayed.
Click on "Close".
The new map is now available on the
system.

Troubleshooting

The following problems may occur
during the update:
The map on the USB device is
not valid. In this case, download the
map to the USB device again, using
TomTom HOME. It may be necessary
to prepare the USB device again.
The version of the map on the USB
device is the same as or is a previous
version of the one already on the
system. In this case, download the
map to the USB device again, using
TomTom HOME. It may be necessary
to prepare the USB device again.

Voice Commands

NOTE For languages not supported by
the system, voice commands are not
available. To use the voice commands,
press the button on the steering wheel
("Voice" button) and say out loud
the command you want to activate.

Global

The following voice commands can be
given after pressing the button on the
steering wheel :
Help
Cancel
Repeat
Voice tutorial
Phone
The following voice commands can be
given after pressing the button on
the steering wheel and saying "Go to
telephone":
Call
Dial
Redial
Call back
Show recent calls
Show outgoing calls
Show missed calls
Show incoming calls
PhoneBook
Search
Show text message
Radio
The following voice commands can be
given after pressing the button on the
steering wheel :
Tune to XXX FM
Tune to XXX AM
Tune in Radio XXX