Installing An Isofix Child Restraint System - Fiat 500 Hybrid 2020 Owner's Handbook Manual

INSTALLING AN ISOFIX
CHILD RESTRAINT
SYSTEM
94) 95) 96) 97) 98)
The car is equipped with ISOFIX
anchorages, a new standard which
makes fitting a child restraint system
quick, simple and safe.
The ISOFIX system lets you install the
ISOFIX child restraining system without
using the car seat belts but connecting
them directly to the car seat with three
anchorages in the car. Traditional
child restraint systems can be fitted
alongside ISOFIX child restraint
systems on different seats in the same
vehicle. Traditional child restraint
systems can be fitted alongside ISOFIX
child restraint systems on different
seats in the same vehicle. To install an
ISOFIX child restraint system, attach it
to the two metal anchorages (A) fig. 72
located in the rear seat cushion and
indicated by the
point where the seat cushion meets the
backrest, remove the parcel shelf and
fix the upper strap (provided with the
child restraint system) to the dedicated
anchor (B) fig. 73 located at the bottom
of the seat back.
fig. 74 shows an example of a Universal
ISOFIX child restraint system for weight
group 1.
76
72
73
WARNING The diagram is indicative
symbol in the
and for fitting purposes only. Fit the
child restraint system according to the
instructions, which must be included.
NOTE When a Universal ISOFIX child
restraint system is used, only ECE R44
"ISOFIX Universal" (R44/03 or further
upgrades) type-approved child restraint
systems can be used.
F0S0133
74
F0S0134
The Universal Isofix "Duo Plus" child
restraint system and the special
"G 0/1" system are available from
Lineaccessori MOPAR ® .
For any further details on
installation/use, refer to the instruction
manual for the child restraint system.
F0S0132