My:car - Fiat 500 Hybrid 2020 Owner's Handbook Manual

system switching off is set. The data
are automatically transferred to the
devices when the engine is switched
off. Transferred data will be deleted
from the system memory in this
manner. You can choose to store
the trip data or not, by pressing the
"Settings" button and by setting the
storage activation and the USB or
Cloud transfer mode.
NOTES When the USB memory stick is
full, the warning messages are shown
on the radio display.
When the eco:Drive™ data is not
transferred to USB memory stick for
a long time, the internal memory of
the Uconnect™ LIVE system may
be exhausted. Follow the instructions
given by the messages on the radio
display.

my:Car

my:Car allows you to keep the
condition of your car always under
control.
my:Car can detect malfunction in real
time and inform the user about the
expiry of the servicing interval. Press
the "my:Car" button to interact with the
application.
The display will show a screen with the
"care:Index" section, which provides
all the detailed information about the
status of the vehicle. Press the "Active
warnings" button (if present) to show
178
the details of the faults of the car which
caused a warning light to switch on.
The car's status can be viewed on both
the www.driveuconnect.eu and via the
Uconnect™ LIVE App.
Settings
Press the button on the front panel
to display the "Settings" main menu.
NOTE The menu items displayed vary
according to the versions. The menu
includes the following items:
Display;
Units;
Voice commands;
Clock & Date;
Lights (where provided);
Doors & Locks;
Vehicle Off Options;
Audio;
Phone / Bluetooth®;
SiriusXM Setup (where provided);
Radio Setup;
Restore settings;
Clear Personal Data.
Navigation (Uconnect™
5" Nav LIVE only)
Planning a route
WARNING In the interest of safety and
to reduce distractions while you are
driving, you should always plan a route
before you start driving.
Press the "Nav" button to show the
navigation map on the display.
To plan a route, do the following:
tap the screen to open the Main
menu;
tap "Navigate to";
tap "Address". You can change the
country or state setting by tapping the
flag before you select a city;
enter the town or city name, or the
postcode. Towns with similar names
are shown in the list while you type;
enter the street name. Streets with
similar names are shown in the list
while you type. When the correct street
name appears in the list, tap the name
to select the destination;
enter the house number, then tap
"Done";
if in the Advanced settings menu
the "Show location preview" option is
active, your position is shown on the
map. Tap "Select" to continue or tap
"Back" to enter another address;
when the new route is shown, tap
"Done". For more information about
the route, tap on "Details". To modify
the route, for example, to pass through
a specific location or select a new
destination, touch "Change route";
You are guided to your destination,
using spoken instructions and on-
screen directions.