Exterior Lights; Daytime Running Lights (Drl); Main Beam Headlights; Direction Indicators - Fiat 500 Hybrid 2020 Owner's Handbook Manual

EXTERIOR LIGHTS

20
DAYTIME RUNNING
LIGHTS (DRL)
17) 18)
For cars without the AUTO function:
with the ignition key at MAR and ring
turned to O fig. 20 the daytime running
lights are activated automatically; the
other lights and interior lighting remain
off.
For cars with the AUTO function:
the daytime running lights are turned
on automatically by the dusk sensor
when the ring is in the AUTO position.
DIPPED BEAM
HEADLIGHTS/SIDE
LIGHTS
With the ignition key turned to MAR,
turn the twist switch to fig. 20. If
dipped headlights are activated, the
daytime running lights switch off and
the side lights and dipped headlights
switch on.
The warning light switches on in
the instrument panel.
With the selector switch in the AUTO
position, the side lights and the dipped
beam headlights are controlled by the
dusk sensor.

MAIN BEAM HEADLIGHTS

With ring in position
stalk forward toward the dashboard
F0S0210
(stable position). The
switches on in the instrument panel.
For cars with the AUTO function: with
the ring in the AUTO position and the
dipped beam headlights on, push the
stalk forwards toward the dashboard.
When the stalk is pulled towards the
steering wheel again, beyond the end
of travel position, the main beam
headlights deactivate, the dipped
headlights reactivate and the
warning light switches off.
FLASHING THE
HEADLIGHTS
To do this, pull the stalk towards the
steering wheel (unstable position)
fig. 20 regardless of the position of ring.
PARKING LIGHTS
These lights can be turned on with the
ignition switch in the STOP position or
with the key removed, by moving the
left stalk ring first to the O position (or
the AUTO position if the vehicle does
not have a dusk sensor) and then to
position
switches on in the instrument panel.
Repeat the same operation to switch
them off.

DIRECTION INDICATORS

Take the stalk fig. 20 to the (stable)
position:
upwards (position 1): to activate
, push the
the right direction indicator;
downwards (position 2): activates
warning light
the left direction indicator.
"Lane Change" function
Move the lever upwards or downwards
(unstable position) for less than half a
second and the direction indicator
will flash 3 times to signal a lane
change, then immediately switch off
automatically.
"FOLLOW ME HOME"
DEVICE
This function allows the space
surrounding the car to be lit up for the
set period of time.
Activation
The "Follow Me Home" device activates
by pulling the fig. 20 lever all the way
towards the steering wheel.
You can activate this function within 2
minutes of turning the engine off. This
. The warning light
17