Aaeon MIX-H310A2 Manual page 28

3. Backlight inverter power header (5-pin INV1)
Connect a backlight inverter power cable to this header.
IMPORTANT: The backlight inverter power connector supports 1A current to
the maximum.
4. SATA 6.0 Gb/s ports (7-pin SATA6G_1~2)
These ports connect to SATA 6.0 Gb/s hard disk drives via SATA 6.0 Gb/s
signal cables.
IMPORTANT: When using hot-plug and NCQ, set the SATA Mode Selection
item in the BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
2-20
INV1
INV_ENABKL
GND
GND
BKLT_CTRL
+BLVCC
PIN1
SATA6G_1
RSATA_RXP
A
RSATA_RXN
SATA6G_2
B
RSATA_TXN
RSATA_TXP
GND
GND
GND
MIX-H310A2