Page 1
Walton - 2 Drawer Filer Assembly Instructions - 166/2629 Please keep for future reference Dimensions Width - 39.5cm Depth - 59.5cm MADE IN Height - 74cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 1 - 17/10/13...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 22kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side (D2372A) (D2373A) (D2371A) (718 x 570mm) (718 x 570mm) (394 x 593mm) Base...
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the 2 file fronts Screw 2 metal dowels into the holes shown on the back of the file front Note: Tighten metal dowels up fully against the panels.
Page 6
Assembly Instructions Step 4 Attach the drawer sides to the file front Push the left drawer side and right drawer side onto the back of the file front Turn the small locking nuts on the left drawer side and right drawer side Note: Turn the locking nuts...
Page 7
Assembly Instructions Step 6 Attach the handle Attach a handle each of the the 2 file fronts using 2 screws Turn the drawer assemblies over Step 7 Fit the runners Runners must be pushed up against the file front Position the runner onto the left drawer side as shown, making sure that the front of the...
Page 8
Assembly Instructions Step 8 Fit runners to the left side Fit the 2 runners marked ‘CL’ to the left Finished side front edge The 1st screw uses the 2nd hole in from the front of the runner Fit the 2nd screw into the corresponding hole in the left side...
Page 9
Assembly Instructions Step 10 Fit runners to the right side Fit the 2 runners marked ‘CR’ to the right side The 1st screw uses the 2nd hole in from the front of the runner Fit the 2nd screw into the corresponding hole in the right side Finished front edge...
Page 10
Assembly Instructions Step 12 Plain chipboard Prepare the base surface Tap 4 wooden dowels into the base Insert 4 large locking nuts into the base Finished front edge Step 13 Join the right side and base Push the base onto the right side Use a screwdriver to tighten the 2 large...
Page 11
Assembly Instructions Step Fit the left side Push the left side onto the base Use a screwdriver to tighten the 2 large locking nuts fitted to the base Step 15 Prepare the top Screw 4 metal dowels into the top...
Page 12
Assembly Instructions Step 16 Fit the top Push the top onto the left side and right side Use a screwdriver to tighten the 4 large locking nuts fitted to the left side and right side Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
Page 13
Assembly is complete Side panel Drawer side If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
Need help?
Do you have a question about the Walton 166/2629 and is the answer not in the manual?
Questions and answers