Table of Contents
Advertisement
Samuel Shorty Bunk Bed
Dimensions
Width - 181cm
Depth - 82cm
Height - 160cm
Important
- Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
- Please keep for future reference
162/4131
188/9299
170/8253
IMPORTANT NOTE:
The top surface of the mattress
should not come above this line.
IMPORTANT NOTE:
Do not fully tighten
all bolts until all parts
of the bed are
assembled.
Issue 2 - 20/06/14
Advertisement
Table of Contents
Related Manuals for Argos Samuel Shorty Bunk Bed
Summary of Contents for Argos Samuel Shorty Bunk Bed
- Page 1 Samuel Shorty Bunk Bed Assembly Instructions 162/4131 - Please keep for future reference 188/9299 170/8253 IMPORTANT NOTE: The top surface of the mattress should not come above this line. Dimensions IMPORTANT NOTE: Do not fully tighten Width - 181cm all bolts until all parts...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • During assembly do not stand • To reduce the components and tools listed on or put weight on the product, this likelihood of the following pages.
- Page 3 Components - Parts If you have damaged or missing components, call the Customer Helpline: Argos = 0345 640 0800 Please check you have all the parts listed below End post x 4 Upper side safety rail x 2 (Ø4.5 x 160cm) (73.5 x 35.5 x 3.5cm)
- Page 4 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. M6 x 20mm Bolt x 8 M6 x 65mm Bolt x 15 M6 x 40mm Bolt &...
- Page 5 Assembly Instructions Step 1 Assembling end panels Position end posts upper side safety rails and lower side rails as shown. Ensure to position the rails with middle holes on the bottom as shown. warning Attach lower side rail sticker into holes on end posts and fix using washers...
- Page 6 Assembly Instructions Step 2 Assembling lower rails Important note: Determine your preferred upper bunk bed entry (left or right). Ensure to position holes (for ladder assembly) on the lower rails Right upper Left upper according to your bunk entry bunk entry preferred upper bunk bed entry as shown.
- Page 7 Assembly Instructions Step 3 Assembling upper front safety rail Ensure to position holes (for ladder bolt assembly) on the upper front safety rail according to your preferred upper bunk bed entry as shown. With the help of an assistant, attach upper front safety rail to end holes...
- Page 8 Assembly Instructions Step 5 Assembling ladder Important note: Make sure to correctly position the ladder. The arrow sticker on arrow up the top edge must be positioned at the top rail as shown. Attach the ladder upper front safety rail &...
- Page 9 Assembly Instructions Step 7 Assembling lower slats Insert slats into holes on lower rails . Lock it into position by pushing firmly down with your hand. Note: Make sure the slat is aligned to the hole before pushing it firmly down.
- Page 10 Warning: Before drilling, check wall for hidden pipes and cables. Consult a Wall qualified specialist if unsure. Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800...