Page 1
Phoenix 2 Half Door Storage Cubes Assembly Instructions 162/2690 - Please keep for future reference 166/6230 166/6632 181/5971 Dimensions Width - 70cm Depth - 35.5cm Height - 70cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Version2 Date: 23/10/13...
Page 2
Take to your local authority waste disposal centre. IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE • Argos Ltd. MK9 2 NW. • This product is suitable for • Regularly check all fastenings children in the age 6 or above.
Page 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the panels listed below Pilot holes for guidance only Middle support x 2 Top/Bottom panel x 2 (69.9 x 34.9cm) (34.9 x 32.6cm) Side panel x 2 (66.8 x 34.9cm)
Page 4
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required. 50mm Dowel x 2 30mm Dowel x 12 50mm Screw x 8 25mm Screw x 2 12mm Screw x 6 Nail x 22 Screw cover x 4...
Page 5
Assembly Instructions Step 1 Attaching door stoppers Door stoppers onto the Middle supports Step 2 Attaching metal plates & door hinges Metal plates onto the Door panels Insert the Door hinges into the Door panels...
Page 6
Assembly Instructions Step 3 Attaching the side panels Insert Dowels into the Shelf and Middle Finished supports front edge Middle supports onto the Shelf Finished front edge Fix the onto the Shelf Finished front edge...
Page 7
Assembly Instructions Step 4 Attaching the door panels Carefully locate the Door panel onto the unit, aligning the Door hinges with the corresponding holes. Finished front edge Bottom panel onto the unit. Note: Ensure the Door hinges are aligned with the corresponding holes.
Page 8
Assembly Instructions Step 5 Fixing back panel back surface Back panels onto the unit. Important: The unit MUST be ‘square’ when the back is attached. back edge Step 6 Attaching the handles Handles onto the Door panels...
Page 9
Assembly Instructions Step Attaching the screw covers Screw overs cover the screw heads. Step 8 Finishing the unit With help, place the unit in the intended position. Assembly is complete.
Page 10
Assembly Instructions Step 9 Fixing with another unit Warning: unit is heavy. wall Lift with care. Wall strap to link another unit from the back. It is recommended that the Top panel Note: Wall plugs supplied are for solid wall only. Fixing to wall be used for your wall, seek professional advice if in doubt...
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit.
Need help?
Do you have a question about the Phoenix 162/2690 and is the answer not in the manual?
Questions and answers