Animation Settings - Epson EasyMP EMP-735 Operation Manual

Creating and Sending a Scenario
Stop
Pause
Play
Rewind
Fast
Forward
(FF)
Volume
Status Bar
4
After verification is complete, click the "
screen to close the Scenario Preview screen.

Animation Settings

In EMP SlideMaker2, PowerPoint animation effects and similar effects can be set
for each cell in the scenario. It is possible to set and project projection times and
animations for each divided frame for slides with animations set in PowerPoint.
In this case, right-click the desired animation in the Animation verification
window, then click "Cell Properties".
Tip :
Include files for animations set in advance in PowerPoint to produce smoother
animation when playing the scenario. To set animations in PowerPoint slides, we
recommend these be set within PowerPoint. Use the method described here to set an
animation in an image file, or to set animation in a slide included in a scenario without
maintaining the animation.
Stop play and return to the first slide.
Temporarily stops the slides when "Automatically" is
selected for the scenario.
Starts the scenario preview. In addition, this restarts stopped
or paused scenarios. The following slide is displayed when
the scenario behavior is set to "On mouse click".
Returns the slide to the one previous to the currently
displayed slide or returns the screen previous to the
animation being executed. The animation effects are not
performed upon return.
Shows the next slide (one after the current slide) or shows
the screen after animation execution. At this time the
animation effects are not executed.
Performs volume control. Sets the level of the background
music.
Displays the state of progress of the scenario on a bar. At
first there is no bar display, and then the bar extends from
left to right as the scenario progresses. The scenario ends at
the rightward end of the bar.
15
EasyMP Operation Guide
" button at the top right of the