Special (Reset) Function; Oil Reset Service - Launch X-431 Manual

LAUNCH

6 Special (Reset) Function

In addition to amazing & powerful diagnostic function, the tool also features
various service functions. The most commonly performed service functions
contain:
 Oil Reset Service
 Electronic Parking Brake Reset
 Steering Angle Calibration
 ABS Bleeding
 TPMS (Tire Pressure Monitor System) Reset
 Gear Learning
 IMMO Service
 Injector Coding
 Battery Maintenance System
 Diesel Particulate Filter (DPF) Regeneration
 Electronic Throttle Position Reset
There are two methods to reset service lamp: Manual reset or Auto reset. Auto
reset follows the principle of sending command from the tool to vehicle's ECU to
do resetting. While using manual reset, users just follow the on-screen
instructions to select appropriate execution options, enter correct data or values,
and perform necessary actions, the system will guide you through the complete
performance for various service operations.

6.1 Oil Reset Service

This function allows you to perform reset for the engine oil life system, which
calculates an optimal oil life change interval depending on the vehicle driving
conditions and climate.
This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After service,
you need to reset the driving mileage or driving time so that the service lamp
turns off and the system enables the new service cycle.
2. After changing engine oil or electric appliances that monitor oil life, you need
to reset the service lamp.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
X-431 Euro Mini User Manual
31