Preparations; Charging The Tool; Using Your Battery; Power On/Off - Launch X-431 Manual

Hide thumbs Also See for X-431:

Table of Contents

LAUNCH

1. Insert one end of the included charging cable into the power adaptor.

2. Connect the other end into the DC-IN port of the tool.

3. Plug the adaptor into AC outlet.

appears on the screen, it indicates it is being charged. If the logo changes

into

, it indicates that the battery is fully charged. Unplug the power adaptor

from the AC outlet.

 If the battery remains unused for a long period of time or the battery is

completely discharged, it is normal that the tool will not power on while being

charged. Please charge it for a period of 5 minutes and then turn it on.

 Please use the included power adaptor to charge your tool. No responsibility

can be assumed for any damage or loss caused as a result of using power

adaptors other than the one supplied.

 While the tool has low battery, a beep will sound. If it is very low, the tool will

be switched off automatically.

Press [POWER] to turn the tool on.

*Note: If it is the first time you have used this tool or the tool remains idle for a long

period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5

minutes and attempt to turn on again.

Press [POWER] for 3 seconds, an option menu will pop up on the screen. Tap

"Power off" to turn the tool off.

www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

3 Preparations

X-431 Euro Mini User Manual

Table of Contents