Screen Layout; Adjust Brightness; Set Standby Time; Network Setup - Launch X-431 Manual

Hide thumbs Also See for X-431:

Table of Contents

LAUNCH

3.4 Screen layout

There are the following on-screen buttons available on the bottom of the screen.

Tap to navigate to the Job Menu.

Tap it to display a list of applications that are currently running or

recently used.

Tap it to capture the current screen and all captured screenshots

are stored in the Screenshots folder.

Tap it to return to the previous screen or exit the application.

*Tips: Reducing the brightness of the screen is helpful to save the power of the tool.

1. On the Job Menu, tap Tablet Settings -> Display -> Brightness level.

2. Drag the slider to adjust it.

If no activities are made within the defined standby period, the screen will be

locked automatically and the system enters sleep mode to save power.

1. On the Job Menu, tap Tablet Settings -> Display -> Sleep.

2. Choose the desired sleep time.

*Note: Once WLAN is set as ON, the tool will consume more power. While WLAN

keeps unused, please turn it off to conserve battery power.

The tool has a built-in Wi-Fi module that can be used to get online. Once you're

online, you can register the tool, update the diagnostic software & APK, surf the

Internet and send email on your network.

1. On the Job Menu, tap Tablet Settings -> Wi-Fi.

2. Tap or slide the Wi-Fi switch to ON, the tool starts searching for all available

wireless LANs.

www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

X-431 Euro Mini User Manual

Table of Contents