System Ota Upgrade - Launch X-431 Manual

Hide thumbs Also See for X-431:

Table of Contents

LAUNCH

2. Your partner must install the TeamViewer QuickSupport program (if not

installed, go to http://www.teamviewer.com to download it), and then start the

software on his/her computer/mobile device at the same time, in order to

control the partner's computer/mobile device remotely.

3. Input the partner's ID, tap "REMOTE CONTROL" to send a remote control

request.

4. After the partner confirms to accept remote control from your tablet, the

remote assistance is now starting.

8.3 System OTA Upgrade

An Over-the-Air (OTA) update is the wireless delivery of new operating system,

software or data to tablets and mobile phones. Wireless carriers have

traditionally used over-the-air updates to deploy firmware and configure phones

or tablets for use on their network. The initialization of a newly purchased tablet

required an over-the-air update.

*Note: While performing OTA update, please make sure the tool battery has at least

70% and DO NOT run any other programs during the update.

1. On the Job Menu, tap Other modules -> System OTA Upgrade.

2. Tap "Check the Latest Version". Once a newer version is found, follow the

on-screen instructions to download and install the update file.

3. Be patient to wait until the update is done.

www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

X-431 Euro Mini User Manual

Fig. 8-2

Table of Contents