Diagnostics Toolbar; Connections; Preparation; Dlc Location - Launch X-431 Manual

LAUNCH
Search bar: Enables you to use the virtual keyboard to quickly locate
4
the vehicle model. Input the desired vehicle model to start searching.

4.2.4 Diagnostics toolbar

The diagnostics toolbar contains a number of buttons that allow you to print the
displayed data or make other controls. It is displayed on the upper right corner of
the screen and goes through the whole diagnostic session. The table below
provides a brief description for the operations of the diagnostics toolbar buttons:
Name
Home
Print
Exit

4.3 Connections

4.3.1 Preparation

Normal testing conditions
 Turn on the vehicle power supply.
 The vehicle battery voltage should be 9~18V.
 Throttle should be in a closed position.

4.3.2 DLC location

The DLC (Data Link Connector) is typically a standard 16 pin connector where
diagnostic code readers interface with the vehicle's on-board computer. The
DLC is usually located 12 inches from the center of the instrument panel (dash),
under or around the driver's side for most vehicles. If Data Link Connector is not
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
Fig. 4-8
Button
Returns to Job menu screen.
Tap to print the current screen. To perform
printing, you need to purchase an extra Wi-Fi
printer manufactured by LAUNCH separately
and then properly configure it following the
steps described in Chapter 9.10.3.
To exit the diagnostic application.
14
X-431 Euro Mini User Manual
Description