Topens TEW3 Installation And Operation Instructions
  1. Manuals
  2. Brands
  3. Topens Manuals
  4. Gate Opener
  5. TEW3
  6. Installation and operation instructions

Topens TEW3 Installation And Operation Instructions

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Installation and Operation Instructions
Adapter board (1 PC):
*Only need to be used
with some models of
TOPENS gate opener
Range adjustment board (1 PC)
Exit Wand
(Item NO.: TEW3)
C030414
1
WAND SENSOR with 50 feet (15
meters) 5-core cable (1 PC)
VER 21a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TEW3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Topens TEW3

Summary of Contents for Topens TEW3

  • Page 1 Exit Wand Installation and Operation Instructions (Item NO.: TEW3) Adapter board (1 PC): *Only need to be used with some models of TOPENS gate opener WAND SENSOR with 50 feet (15 meters) 5-core cable (1 PC) Range adjustment board (1 PC)
  • Page 2 Opener by providing hands free operation of your gate. An adapter PCB is to be added when it is used with some models of TOPENS gate opener. The gate opens automatically when the wand senses the vehicle moving past. The EXIT WAND is comprised of three elements: the WAND with 5-core cable, range adjustment board and adapter board for some models of TOPENS gate opener.
  • Page 3 You can read the user manual of the opener to check if the adapter board is needed or not. STEP 2: Wiring the WAND to the control board and range adjustment board. Following are the examples to a few models of TOPENS gate opener. More details please refer to the user manual of the gate opener.
  • Page 4 Wiring Diagram of the wand to the KD902&AT1202 swing gate opener (Need to plug the adapter board to the control board at first) Wiring Diagram of the wand to the DK series sliding gate opener Wiring Diagram of the wand to the RK990&RK1200&CK1200 sliding gate opener (Need to plug the adapter board to the control board at first)
  • Page 5 Troubleshooting 1. Ensure all the wiring connections are correct before testing. 2. Ensure there is no moving object around the wand and then try it again. TOPENS Website www.topens.com Any question, please do not hesitate to contact us: E-mail: support@topens.com Kindly include your Product Model, Purchasing Date &...

Table of Contents